Info
Info
News Article

Imec And Cadence Tape Out Industry's First 3nm Test Chip

News

Extreme ultraviolet and 193 immersion lithography technology and Cadence digital tools used to design 3nm CPU core

The world-leading research and innovation hub in nanoelectronics and digital technologies, imec, and Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that its extensive, long-standing collaboration has resulted in the industry's first 3nm test chip tapeout. The tapeout project, geared toward advancing 3nm chip design, was completed using extreme ultraviolet (EUV) and 193 immersion (193i) lithography-oriented design rules and the Cadence® Innovus™ Implementation System and Genus™ Synthesis Solution. Imec utilized a common industry 64-bit CPU for the test chip with a custom 3nm standard cell library and a TRIM metal flow, where the routing pitch was reduced to 21nm. Together, Cadence and imec have enabled the 3nm implementation flow to be fully validated in preparation for next-generation design innovation.

The Cadence Innovus Implementation System is a massively parallel physical implementation system that enables engineers to deliver high-quality designs with optimal power, performance and area (PPA) targets while accelerating time to market. The Cadence Genus Synthesis Solution is a next-generation, high-capacity RTL synthesis and physical synthesis engine that addresses the latest FinFET process node requirements, improving RTL designer productivity by up to 10X. For more information on the Innovus Implementation System, please visit www.cadence.com/go/innovus3nm, and to learn about the Genus Synthesis Solution, visit www.cadence.com/go/genus3nm.

For the project, EUV and 193i lithography rules were tested to provide the required resolution, while providing PPA comparison under two different patterning assumptions. For more information on EUV technology and 193i technology, visit https://www.imec-int.com/en/articles/imec-presents-patterning-solutions-for-n5-equivalent-metal-layers.

"As process dimensions reduce to the 3nm node, interconnect variation becomes much more significant," said An Steegen, executive vice president for semiconductor technology and systems at imec. "Our work on the test chip has enabled interconnect variation to be measured and improved and the 3nm manufacturing process to be validated. Also, the Cadence digital solutions offered everything needed for this 3nm implementation. Due to Cadence's well-integrated flow, the solutions were easy to use, which helped our engineering team stay productive when developing the 3nm rule set."

"Imec's state-of-the-art infrastructure enables pre-production innovations ahead of industry demands, making them a critical partner for us in the EDA industry," said Dr. Chin-Chi Teng, corporate vice president and general manager in the Digital & Signoff Group at Cadence.

"Expanding upon the work we did with imec in 2015 on the industry's first 5nm tapeout, we are achieving new milestones together with this new 3nm tapeout, which can transform the future of mobile designs at advanced nodes."



AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.

REGISTER FOR FREE

VIEW SESSIONS
U.S. Department Of Defense Partners With GLOBALFOUNDRIES To Manufacture Secure Chips At Fab 8
Can New Advances In CMOS Replace SCMOS Sensors In Biomedical Applications?
New Plant To Manufacture Graphene Electronics
Siemens And ASE Enable Next-generation High Density Advanced Package Designs
Will Future Soldiers Be Made Of Semiconductor?
Cadence Announces $5M Endowment To Advance Research
Panasonic Microelectronics Web Seminar
ITRI And DuPont Inaugurate Semiconductor Materials Lab
Tower Semiconductor Announced Program Creating An Integrated-Laser-on-Silicon Photonics Foundry Process
Changes In The Management Board Of 3D-Micromac AG
Onto Innovation Announces New Inspection Platform
ASML Reports €14.0 Billion Net Sales
SUSS MicroTec Opens New Production Facility In Taiwan
DISCO's Completion Of New Building At Nagano Works Chino Plant
Obducat Receives Order For Fully Automated Resist Processing Tool From A Customer In Asia
TEL Introduces Episode UL As The Next Generation Etch Platform
Tescan And 3D-Micromac Collaborate To Increase The Efficiency Of Failure Analysis Workflows
South Korean Point Engineering Chooses ClassOne’s Solstice S8 For Advanced Semiconductor Plating
AP&S Expands Management At Beginning Of 2021
GOODFELLOW Confirms Membership In The BSI UK Graphene Group
Belgian Initiative For AI Lung Scan Analysis In Fight Against COVID-19 Goes European
K-Space Offers A New Accessory For Their In Situ Metrology Tools
Imec Demonstrates 20nm Pitch Line/Space Resist Imaging With High-NA EUV Interference Lithography
EV Group Establishes State-of-the-art Customer Training Facility

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification} Array
Live Event