+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
News Article

EBARA presents DYNOX Gas Abatement System


After intensive development work, EBARA Precision Machinery Europe presents the innovative and trend-setting exhaust Gas Abatement System DYNOX™. DYNOX™ sets standards when it comes to the environment and efficiency. DYNOX™ combines all the benefits of the previous S.DOC™ technology in one single product.

Thanks to advanced technology, DYNOX™ allows:
- an enormous cost savings - up to 95% lower electricity costs compared to conventional systems
- an exemplary sustainability - no gases (fuel gas, oxygen, nitrogen) are required
- an excellent environmental balance - no CO2, no NOx, only ambient air is used
- no waste heat
- cost savings also because no waste water has to be disposed of

Areas of application:
- oxidation of pyrophoric gases

Highest efficiency and thus radically reduced costs:
- easy installation, as only one component needs to be installed
- no need for piping and vacuum or water pumps
- no inflow and outflow of waste water
- no fuel gases required
- no NOx emissions
- 90 % lower energy consumption (compared to S.DOC™)
- almost no wearing parts, thus minimal maintenance effort
- 1:1 dimensions to the S.DOC™ allow easy replacement (drop-in-replacement)
- intelligent circuit concept enables control of old units

Dynamic oxidation is the most cost-effective and sustainable solution for cleaning pyrophoric exhaust gases, such as those produced in semiconductor production or photovoltaics in particular. In the past, EBARA made a statement in innovative exhaust gas abatement with the S.DOC™ system. The costs for waste water disposal are completely eliminated and since DYNOX™ does not require a circulation pump, electricity and wear costs are also reduced to an unprecedented extent.
Thanks to the sophisticated technology, the DYNOX™ installation is unproblematic and particularly inexpensive, as there are no pipes for exhaust gases or waste water. The high-quality components from Germany and Switzerland, as well as the manufacturing in our factory in Dresden, guarantee first-class quality, highest operational safety and lowest maintenance costs. The DYNOX™ complements the EBARA portfolio for environmentally friendly gas abatement.

Electricity costs are becoming an even greater expense factor

It is not only since the beginning of the Ukraine crisis that the price of electricity in Europe, and especially in Germany, has been growing extremely strongly. If production can no longer be profitable, the cost of energy also becomes a threat to the labour market. Products like DYNOX™ provide the right answer to the emerging challenges of our time. DYNOX™ requires just 10% of the energy of conventional systems with comparable performance - 2.1 kW for a pump-based system compared to 200 watts for the DYNOX™. In addition, DYNOX™ uses only ambient air.

Environment and technology in harmony

Products like DYNOX™ bring high technology, customer wishes and environmental considerations into harmony. DYNOX™ is thus in the best EBARA tradition. EBARA's goal is to develop products and services that contribute to the sustainable use of resources.

Photonis announces agreement to acquire Xenics, a leader in Infra-Red imaging solutions
Phlux Technology Secures £4m in Seed Funding
Start-ups: build up your ecosystem
Trends in the semiconductor industry
Advantest Unveils E5620 DR-SEM for Review and Classification of Ultra-Small Photomask Defects
Xenics introduces Wildcat+ 640
Advantest Introduces New inteXcell Series
Sony Semiconductor Israel Redefines IoT Connectivity Platform
Sensor Sales Stay Strong Due to Big ASP Rise
Advantest Launches ACS Solution Store to Enable Real-Time Data Analytics Solutions
Lam Research Acquires SEMSYSCO to Advance Chip Packaging
Infineon planning a major investment in a new factory in Dresden
Particle Measuring Systems introduces 10 nm aerosol particle counter
EBARA presents DYNOX Gas Abatement System
TSMC Launches OIP 3DFabric Alliance
DuPont reshapes IC materials manufacturing for post-COVID success
Evolving subfab vacuum challenges demand collaborative solutions
Next-gen low-k films can address present, future fabrication challenges
Critical Manufacturing redefines semiconductor MES for greater agility, success
Brewer Science bonding & dielectric materials deliver packaging solutions for 5G, IoT devices
Cutting FOPLP pattern distortion
EV Group advances leadership in optical lithography
ASM joins semiconductor climate consortium
KLA Launches New Double-Sided Direct Imaging Platform
Micron ships advanced DRAM technology with 1β node
Nor-Cal will do business as Pfeiffer Vacuum
ClassOne Equipment Releases Major New Lot of Used Semiconductor Tools for Resale
Park Systems Celebrates the Merger and Acquisition of Accurion GmbH
Amkor to support European semiconductor ecosystem
Nanometre components require sub-nanometre precision
ALD TechDay for More-than-Moore devices
Cadence Expands Collaboration with Samsung Foundry

Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: