+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
News Article

Brewer Science announces new silicon-rich gapfill material


Brewer Science has announced the launch of OptiStack® PL200 series material, a silicon-rich high-aspect ratio gapfill material designed to provide superior planarization, solving problems faced in sacrificial gapfill applications. This material series also facilitates next-generation advanced-node patterning by providing a protective, easily strippable, gapfill material that overcomes challenges with nanosheet architectures.

OptiStack® PL200 series material is an innovative spin-on, silicon-rich gapfill material providing extremely low defectivity in comparison to legacy gapfill materials. This material series is designed to provide excellent gapfill of <10-nm trench and via structures, while also providing superior planarization for robust, faithful lithography and etch transfer. The stability of the product provides a long shelf life of 365 days (at 21°C).

Dual damascene is an important process in all modern back end of line (BEOL) metallization to make copper interconnects. One critical step during dual damascene is gapfilling the incoming via structures to prepare for subsequent trench opening. Traditionally, a thick bottom antireflective coating (BARC) or organic gapfill material was used to fill the vias. Because some of the lower metal layers now must go through multiple patterning steps to achieve the required critical dimensions (CDs), the whole gapfill, patterning, and etching process becomes even more complicated.

The new OptiStack® PL200 series material improves the traditional process in several ways:
Fewer steps. The ability to match oxide etch rates. Because the new material etches together with surrounding dielectric materials, the extra recess step needed when a traditional SOC gapfill is used can be eliminated.
More compatible with pitch splitting processes. The new material has very low shrinkage in O2 based ash processes. It can survive the photoresist stripping and be ready for the subsequent 2nd and 3rd photo steps for multiple patterning.
Easy to strip. OptiStack® PL200 series material is completely removable by several common wet etch chemistries, such as SC1. The single-step, wet clean with zero defect capability also helps in next-generation applications by providing an effective clean for narrow, horizontal nanosheets.
CMP compatibility. When a strict global-level planarization is needed, this new material can be further planarized by CMP for use in high topography, and/or highly variable pattern density devices.

Compared to legacy solutions, OptiStack® PL200 series material offers unparalleled gapfilling capability, superior planarity over various pitch densities, extremely low shrinkage in O2 ash, and minimal defectivity, all essential in yield improvement for many fabrication layers in advanced nodes.

OptiStack® PL200 series material shows great potential in other applications, especially in advanced Fin-FET processes and future architectures, such as forksheets, nanosheets/gate-all-around (GAA) and CFET.

Reduces yield loss from inadequate cleaning in advanced processes
A traditional plasma cleaning process is insufficient at cleaning deep structures, leading to potential contamination or damage to transistor structures. In forksheet, or nanosheets/gate-all-around transistor structures, cleaning of the horizontal nanosheets is crucial because residual material on or between nanosheets can prevent removal, or deposition, of subsequent atomic layers. A cleaning with SC1 effectively removes OptiStack® PL200 series material and does not damage critical areas when building the N-type metal oxide semiconductor (NMOS) and p-channel metal-oxide semiconductor (PMOS) structures.

Tektronix and EA Elektro-Automatik offer expanded power portfolio
83% of supply chains can’t respond to disruptions in 24 hours
CMC Microsystems and ventureLAB sign MoU
Renesas introduces FemtoClock 3 timing solution
Mycronic receives order for SLX mask writer
Rapidus reveals US subsidiary and opens Silicon Valley office
Infineon introduces news MOTIX motor gate driver IC
Brewer Science unveils Smart Warehouse Monitor System
Symposium to showcase breakthroughs in microelectronics
CHIPS for America promotes over $50 million funding opportunity
SEMI University launches in-person courses
Samsung Electronics to establish Texan semiconductor ecosystem
Semiconductor chips drive innovation in AI and industries
Semiconductor equipment sales slip to $106.3 billion
Mouser Electronics receives 2023 Global Best Service Distributor of the Year Award from Diodes Incorporated
Quantum processor testing and measurement facilities up and running
Semiconductor Research Corporation announces 2024 call for research
Trend report unveils the future of circular electronics
PCIM Europe 2024: highlights and new records
PI contributes to technology node development
QP Technologies achieves ANSI/ESD S20.20 Certification
Renesas commences operations of Kofu Factory
TRI wins three Innovation Awards
Tektronix and recently acquired EA Elektro-Automatik offer expanded power portfolio
NEDO approves Rapidus’ FY2024 Plan and Budget
SK hynix signs Advanced Chip Packaging agreement
Renesas expands Quick Connect Studio
Infineon and Amkor deepen partnership
AP&S establishes site in the USA
Dracula Technologies selected by STMicroelectronics
RAIN RFID data to transform corporate sustainability initiatives
Integrated AMR replaces reed switches and hall effect sensors
Search the news archive

To close this popup you can press escape or click the close icon.
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • View all news 22645 more articles
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: