News Article
Fujitsu Microelectronics, e-Shuttle and D2S to develop maskless ICs
Industry leaders introduce design for e-beam technology to deliver significant cost and time reductions for producing prototypes, derivatives and high value ICs.
Fujitsu Microelectronics (FM), e-Shuttle and D2S, an emerging design and software company, announced an agreement under which FM and e-Shuttle will adopt D2S' advanced design for e-beam (DFEB) technology, starting with a 65 nm low power (LP) library, to result in the creation of test silicon to refine and validate DFEB technology for the 65 nm, 40 nm and below nodes. e-Shuttle will produce test chips using D2S' advanced DFEB design and software capabilities, and FM's standard cell libraries.
These test chips will be manufactured using Advantest's e-beam direct write (EBDW) lithography equipment, which is already in operation at e-Shuttle. As a result of this partnership, FM will be able to manufacture ICs faster and more cost effectively than is possible with conventional e-beam direct lithography technologies.
The rising cost trends of advanced ICs show no signs of slowing unless a new manufacturing approach is adopted. Especially with mask budgets doubling at every node, the application range and market for low volume ASICs (custom ICs) continue to shrink, with future profitability of many applications anticipated to be threatened. Without the need to rely on a lithography breakthrough, D2S' advanced DFEB technology maximises and enhances the existing e-beam technology from Advantest. By efficiently employing the EBDW approach, DFEB technology eliminates the cost of masks and can speed time to market by shortening the 'design to lithography' process flow. In addition to the obvious advantages this will deliver to systems companies seeking early prototypes for testing, this type of DFEB technology can dramatically impact specific application fields, such as computing, as well as a host of low to mid volume semiconductor companies producing test chips, engineering samples and design derivatives.
"We are uniquely positioned with e-Shuttle as the leader in manufacturing chips using the DFEB approach," said Yoji Hino, corporate executive vice president of Fujitsu Microelectronics. "We expect to see the benefits of this collaboration, in terms of reduced costs and time savings, starting in 2009. This 'design to manufacturing' collaboration will facilitate a unique capability for virtually maskless ICs that will increase design starts. Enabling the long tail of ASIC designs, particularly for derivative designs, is beneficial for the semiconductor industry overall."
"e-Shuttle has been in operation since November 2006 with the mission to bring EBDW capabilities to low volume production applications. This collaboration further increases the throughput of our production line," said Haruo Tsuchikawa, CEO and president of e-Shuttle, "We view this type of collaboration between design software, design, manufacturing, and equipment makers to be essential for maximising the capabilities of today's fabrication technologies."
"The increasing cost of semiconductor masks is making low volume production of custom ICs economically infeasible yet, in aggregate, this segment can represent as much volume as the high volume segment," said Aki Fujimura, founder and CEO of D2S. "This long tail of the custom IC business can be enabled through a virtually maskless DFEB technology. By not requiring the development of any revolutionary new hardware technologies, this design and software approach represents a low risk, low cost path to a new production paradigm."
These test chips will be manufactured using Advantest's e-beam direct write (EBDW) lithography equipment, which is already in operation at e-Shuttle. As a result of this partnership, FM will be able to manufacture ICs faster and more cost effectively than is possible with conventional e-beam direct lithography technologies.
The rising cost trends of advanced ICs show no signs of slowing unless a new manufacturing approach is adopted. Especially with mask budgets doubling at every node, the application range and market for low volume ASICs (custom ICs) continue to shrink, with future profitability of many applications anticipated to be threatened. Without the need to rely on a lithography breakthrough, D2S' advanced DFEB technology maximises and enhances the existing e-beam technology from Advantest. By efficiently employing the EBDW approach, DFEB technology eliminates the cost of masks and can speed time to market by shortening the 'design to lithography' process flow. In addition to the obvious advantages this will deliver to systems companies seeking early prototypes for testing, this type of DFEB technology can dramatically impact specific application fields, such as computing, as well as a host of low to mid volume semiconductor companies producing test chips, engineering samples and design derivatives.
"We are uniquely positioned with e-Shuttle as the leader in manufacturing chips using the DFEB approach," said Yoji Hino, corporate executive vice president of Fujitsu Microelectronics. "We expect to see the benefits of this collaboration, in terms of reduced costs and time savings, starting in 2009. This 'design to manufacturing' collaboration will facilitate a unique capability for virtually maskless ICs that will increase design starts. Enabling the long tail of ASIC designs, particularly for derivative designs, is beneficial for the semiconductor industry overall."
"e-Shuttle has been in operation since November 2006 with the mission to bring EBDW capabilities to low volume production applications. This collaboration further increases the throughput of our production line," said Haruo Tsuchikawa, CEO and president of e-Shuttle, "We view this type of collaboration between design software, design, manufacturing, and equipment makers to be essential for maximising the capabilities of today's fabrication technologies."
"The increasing cost of semiconductor masks is making low volume production of custom ICs economically infeasible yet, in aggregate, this segment can represent as much volume as the high volume segment," said Aki Fujimura, founder and CEO of D2S. "This long tail of the custom IC business can be enabled through a virtually maskless DFEB technology. By not requiring the development of any revolutionary new hardware technologies, this design and software approach represents a low risk, low cost path to a new production paradigm."