+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
*/
News Article

EV Group Adds In-Line Metrology Capability to Wafer Bonding Systems

News
First-ever Integration of In-line Metrology with Temporary Bonding/Debonding 
EV Group (EVG),has introduced a new in-line metrology module for its EVG850TB automated temporary bonding and debonding systems.  This new metrology capability, which is now available as an option on the EVG850TB and EVG850DB platforms, allows customers to implement in-line process control for thin-wafer processing.  This enables IC manufacturers to reduce defects and wafer breakage—thereby improving yields and lowering production costs. Adding in-line metrology to thin-wafer processing is particularly crucial in helping to enable the ramp-up of 3D-IC and TSV manufacturing from pilot-line to volume production. 

EVG's new integrated in-line metrology module can detect a variety of process irregularities and defects during temporary bonding and debonding, including: total thickness variation (TTV) of the carrier wafer, adhesive layer, bonded stack and thinned wafer; bow/warp of the bonded stack; and voids in the bond interface.  

With semiconductor device scaling reaching its physical limits and becoming increasingly cost prohibitive, IC manufacturers are turning to 3D IC architectures—where multiple circuit layers are stacked into a single circuit and connected via TSVs—in order to increase device functionality.  Thin-wafer processing is key to enabling TSV applications.  However, since thin wafers are very fragile and prone to breakage, temporary bonding of the device wafer to a carrier wafer is needed to provide stability to the device wafer during thin-wafer processing.  After thinning and backside processing, the device wafer must then be debonded in order for the individual devices to be singulated and packaged. 

Since device wafers undergo many process steps prior to thin-wafer processing, it is essential that the wafer thinning and bonding/debonding process do not contribute to yield loss. By integrating in-line metrology into its EVG850TB/DB platforms—the industry standard for temporary wafer bonding and debonding—EVG has provided its customers with a powerful new tool to optimize their wafer-thinning and bonding processes, reduce tool downtime resulting from yield issues that arise during processing, and maximize their product yields and investments.  

"For more than 10 years, EV Group has pioneered thin-wafer processing with our temporary bonding and debonding solutions—continuously adding new features that enable our customers to aggressively pursue their technology roadmaps and lower their cost of production," stated Dr. Thorsten Matthias, Business Development Director at EVG.  "With our new integrated in-line metrology module, we can now provide a total solution for thin-wafer processing that will enable our customers to reach the next level of production readiness on their leading-edge products by giving them overall control of their entire metrology process, including setting control values to help mitigate the cumulative effects of any bonding/debonding process issues."

Added Matthias, "Beyond improving yields, the integration of in-line metrology to our EVG850TB/DB systems can also enable temporary bonding and debonding to be performed by different companies—opening up an entirely new supply chain model for TSV manufacturing to further increase TSV adoption and drive down costs.  Integrated device manufacturers (IDMs) and foundries can now perform temporary bonding, thinning and backside processing, while outsourced semiconductor assembly and test (OSAT) companies can do the debonding before dicing and packaging—since each party can perform outgoing or incoming qualification of the integrity of these extremely fragile thin wafers."

As part of its ongoing efforts to share its expertise and educate customers and partners regarding its 3D technology capabilities, EV Group will be presenting at two upcoming industry conferences.  Markus Wimplinger, corporate technology development and IP director, will speak on "In-line IR metrology for high-volume temporary bonding applications" at the SEMATECH Workshop on 3D Interconnect Technology, July 13, 2011, in San Francisco, Calif.; and Thorsten Matthias, director of business development, will present on "Thin die stacking for wide I/O interface memory-on-logic" during SEMICON Europa, October 11-13, 2011, in Dresden, Germany.
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: