Info
Info
News Article

Nature Is Nurtured In Nano Technology Computer Chip Manufacturing

News
IBM has announced, what they claim to be as the first-ever application of a breakthrough self-assembling nanotechnology to conventional chip manufacturing, borrowing a process from nature to build the next generation computer chips.
IBM has announced, what they claim to be as the first-ever application of a breakthrough self-assembling nanotechnology to conventional chip manufacturing, borrowing a process from nature to build the next generation computer chips.



The natural pattern-creating process that forms seashells, snowflakes, and enamel on teeth has been harnessed by IBM to form trillions of holes to create insulating vacuums around the miles of nano-scale wires packed next to each other inside each computer chip. In chips running in IBM labs using the technique, the researchers have proven that the electrical signals on the chips can flow 35 percent faster, or the chips can consume 15 percent less energy compared to the most advanced chips using conventional techniques.



The IBM patented self-assembly process moves a nanotechnology manufacturing method that had shown promise in laboratories into a commercial manufacturing environment for the first time, providing the equivalent of two generations of Moore's Law wiring performance improvements in a single step, using conventional manufacturing techniques. This new form of insulation, commonly referred to as "airgaps" by scientists, is a misnomer, as the gaps are actually a vacuum, absent of air.



The technique deployed by IBM causes a vacuum to form between the copper wires on a computer chip, allowing electrical signals to flow faster, while consuming less electrical power. The self-assembly process enables the nano-scale patterning required to form the gaps; this patterning is considerably smaller than current lithographic techniques can achieve.



A vacuum is believed to be the ultimate insulator for what is known as wiring capacitance, which occurs when two conductors, in this case adjacent wires on a chip, sap or siphon electrical energy from one another, generating undesirable heat and slowing the speed at which data can move through a chip.



Until now, chip designers often were forced to fight capacitance issues by pushing ever more power through chips creating, in the process, a range of other problems. They have also used insulators with better insulating capability, but these insulators have become tenuously fragile as chip features get smaller and smaller, and their insulating properties do not compare to those of a vacuum.



The self-assembly process already has been integrated with IBM's manufacturing line in East Fishkill, New York and is expected to be fully incorporated in IBM's manufacturing lines and used in chips in 2009. The chips will be used in IBM's server product lines and thereafter for chips IBM builds for other companies.



"This is the first time anyone has proven the ability to synthesize mass quantities of these self-assembled polymers and integrate them into an existing manufacturing process with great yield results," said Dan Edelstein, IBM Fellow and chief scientist of the self-assembly airgap project.



"By moving self assembly from the lab to the fab, we are able to make chips that are smaller, faster and consume less power than existing materials and design architectures allow."



Edelstein led the IBM team that invented the technique to use copper wiring in computer chips instead of aluminum, now a standard method for producing chips, ushering in a decade of chip innovations from the IBM labs that transformed how chips were built and used across many industries and applications.



The Secret of Self AssemblyThe secret of IBM's breakthrough lies in how the IBM scientists' moved the self-assembly process from the laboratory to a production manufacturing environment in a way that can potentially yield millions of chips with consistent, high performance results. Today, chips are manufactured with copper wiring surrounded by an insulator, which involves using a mask to create circuit patterns by beaming light through the mask and later chemically removing the parts that are not needed.



The new technique to make airgaps by self-assembly skips the masking and light-etching process. Instead IBM scientists discovered the right mix of compounds, which they pour onto a silicon wafer with the wired chip patterns, then bake it. This patented process provides the right environment for the compounds to assemble in a directed manner, creating trillions of uniform, nano-scale holes across an entire 300 millimetre wafer.



These holes are just 20 nanometres in diameter, up to five times smaller than would be possible using today's most advanced lithography technique. Once the holes are formed, the carbon silicate glass is removed, creating a vacuum between the wires -- known as the airgap -- allowing the electrical signals to either flow 35 percent faster, or to consume 15 percent less energy. Self-assembly is a concept scientists have been studying at IBM and in labs around the world as a potential technique to create materials useful for building computer chips.



The concept occurs in nature every day, it is how enamel is formed on our teeth, the process that creates seashells and is what transforms water into complex snowflakes. The major difference is, while the processes that occur in nature are all unique, IBM has been able to direct the self-assembly process to form trillions of holes that are all similar. This new technology can be incorporated into any standard CMOS manufacturing line, without disruption or new tooling.



The self-assembly process was jointly invented between IBM's Almaden Research Centre in California and the T.J. Watson Research Centre in New York. The technique was perfected for future commercial production at the College of Nanoscale Science and Engineering of the University at Albany, within the Albany NanoTech facilities in New York with strong ties to IBM, and at IBM's Semiconductor Research and Development Centre in NewYork.
SUSS MicroTec Purchases The Inkjet Printer Division Of Meyer Burger B.V.
GLOBALFOUNDRIES And GlobalWafers Sign MOU
Infineon Withdraws Outlook For FY20
DISCO Presented With The Supplier Continuous Quality Improvement (SCQI) Award By Intel Corporation
Semiconductor Manufacturing: Achieving Water Authority Compliance
Critical Manufacturing Recognized By Gartner
Efinix’s Trion FPGA Silicon Platform Expands Into Europe
ASYMTEK And DIMA Products Now Entirely Represented In Switzerland By Neutec Electronic AG
A Burgeoning Secondary SME Market Is Inevitable
Semiconductor Memory Adoption To Be Augmented By Penetration Of Smartphones Across The Globe
ACM Research Launches Stress-Free Polishing Tool For Advanced Packaging Applications; Delivers First Tool To Leading Chinese OSAT
Picosun Reinforces Local Operations During The COVID-19 Epidemic
Pfeiffer Vacuum Introduces Extremely Quiet, Dry Pumps
Imec Demonstrates 24 Nanometer Pitch Lines With Single Exposure EUV Lithography
Semiconductor Memory Market Worth Over USD 250 Bn By 2026
EV Group Establishes Heterogeneous Integration Competence Center
High-end Inertial Sensors: At The Dawn Of A Mass-adoption?
50th Hollow Cathode Gas Plasma Source Ordered From Meaglow
Intel Shines Amidst The Carnage Of The 2019 Semiconductor Market
The AP&S Demo Center Will Help You. Request Your Wet Process Demonstration And Be Part Of It Live Via Video Chat.
Security Lithography Advances To Thwart IC Counterfeiting
Picosun Delivers Multiple Production ALD Systems To Asia
Park Systems Announces $1 Million Dollar Nano Research Grant Fund
Particle Measuring Systems Releases 20 Nm Syringe Sampler

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification}