+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
News Article

Chemical sensing chip sniffs out cocaine

News

The new chemical sensing chip developed by researchers. In the future, the chip could be integrated into portable drug detection devices. Credit: Douglas Levere / University at Buffalo

What if you could test for cocaine, opioids and marijuana as quickly as a breathalyzer identifies alcohol?

A new, low-cost chemical sensing chip brings us one step closer to this technology, which has long been on the wish list of police officers and others looking to monitor drug use and curb dangerous driving.

The chip could be integrated into a handheld, portable device for detecting drugs in biological samples such as blood, breath, urine or spit.

"Currently, there is a great demand for on-site drug testing," says Qiaoqiang Gan, PhD, associate professor of electrical engineering in the University at Buffalo School of Engineering and Applied Sciences. "The high-performance chip we designed was able to detect cocaine within minutes in our experiments. It's also inexpensive: It can be produced using raw materials that cost around 10 cents, and the fabrication techniques we used are also low-cost."

"In the future, we are hoping to also use this technology to detect other drugs, including marijuana," he adds. "The widening legalization of marijuana raises a lot of societal issues, including the need for a system to quickly test drivers for drug use."

Gan developed the new chip with a team that included first authors Jun Gao, a research associate of Material Sciences at Fudan University in China, and Nan Zhang, a PhD candidate at UB, along with colleagues from the UB Department of Electrical Engineering; the UB Research Institute on Addictions; and the UB Department of Community Health and Health Behavior in the UB School of Public Health and Health Professions.

The study, funded by the National Science Foundation, was published on May 7 in the journal Small Methods.

Detecting the chemical fingerprint of cocaine and other drugs

A scanning electron microscope image shows the surface of a new chemical sensing chip. The surface consists of gold nanoparticles (small bright dots) that have been deposited over silver nanoparticles (light gray regions) to form a hybrid gold-silver nanostructure. Credit: Nan Zhang

The new chip is an engineered nanostructure that traps light at the edges of gold and silver nanoparticles. When biological or chemical molecules land on the chip's surface, some of the captured light interacts with the molecules and is "scattered" into light of new energies. This effect occurs in recognizable patterns that act as fingerprints, revealing information about what compounds are present.


Because all chemicals "” cocaine, opioids, and active ingredients in marijuana "” have their unique light-scattering signatures, researchers can use the technology to quickly identify a wide range of chemicals.

This sensing method is called surface-enhanced Raman spectroscopy (SERS), and it's not new. But the chip that Gan's team developed is noteworthy for its high performance and low cost.

"SERS holds a lot of promise for rapid detection of drugs and other chemicals, but the materials required to perform the sensing are usually quite expensive," Zhang says. "The chips used for SERS are typically fabricated using expensive methods, such as lithography, which creates specific patterns on a metal substrate. We created our chip by depositing various thin layers of materials on a glass substrate, which is cost-effective and suitable for industrial-scale production."


The new chemical sensing chip developed by researchers. In the future, the chip could be integrated into portable drug detection devices. Credit: Douglas Levere / University at Buffalo

The new chip "” a structure known as a metasurface "” resembles a layer cake, with several horizontal layers of material sitting atop one another.

Specifically, the technology consists of a sheet of dielectric material (e.g. silicon dioxide, aluminum oxide, etc.) sandwiched between a silver mirror (the base of the chip) and a hybrid nanomaterial made from gold and silver nanoparticles (the chip's active surface).

This architecture is ideal for SERS: Molecules of cocaine or other substances fall into the tiny spaces between the nanoparticles on the chip's surface. Then, when the structure is exposed to light for testing, the silver mirror and the dielectric layer act as an "optical cavity," manipulating light in a way that increases the number of photons at the surface of the chip. Ultimately, this intensifies the scattering signature of compounds being sensed, which improves detection.

The technology has a long shelf life, with researchers finding that it performed well after a year in storage. The chip's longevity is due in part to its surface design: The gold nanoparticles, which are deposited last, help to shield the silver nanoparticles from the air, which prevents oxidization, degradation and tarnishing.

"With our structure, we can realize both high performance and stable performance over time," Gan says.

The next step in the research is to install the chip in a simple, portable testing device. This technology would first run blood, breath, urine or saliva through a purification process that extracts specific molecules, such as cocaine or other drugs. Then, any chemicals captured through this procedure would be transferred to the chip for detection and identification.

"The high-performance chip we designed was able to detect cocaine within minutes in our experiments." Qiaoqiang Gan, associate professor of electrical engineering University at Buffalo

Purdue, imec, Indiana announce partnership
Resilinc partners with SEMI on supply chain resilience
NIO and NXP collaborate on 4D imaging radar deployment
Panasonic Industry digitally transforms with Blue Yonder
Global semiconductor sales decrease 8.7%
MIT engineers “grow” atomically thin transistors on top of computer chips
Keysight joins TSMC Open Innovation Platform 3DFabric Alliance
Leti Innovation Days to explore microelectronics’ transformational role
Quantum expansion
indie launches 'breakthrough' 120 GHz radar transceiver
Wafer fab equipment - facing uncertain times?
Renesas expands focus on India
Neuralink selects Takano Wafer Particle Measurement System
Micron reveals committee members
Avoiding unscheduled downtime in with Preventive Vacuum Service
NFC chip market size to surpass US$ 7.6 billion
Fujifilm breaks ground on new €30 million European expansion
Fraunhofer IIS/EAS selects Achronix embedded FPGAs
Siemens announces certifications for TSMC’s latest processes
EU Chips Act triggers further €7.4bn investment
ASE recognised for excellence by Texas Instruments
Atomera signs license agreement with STMicroelectronics
Gartner forecasts worldwide semiconductor revenue to decline 11% in 2023
CHIPS for America outlines vision for the National Semiconductor Technology Center
TSMC showcases new technology developments
Alphawave Semi showcases 3nm connectivity solutions
Greene Tweed to open new facility in Korea
Infineon enables next-generation automotive E/E architectures
Global AFM market to reach $861.5 million
Cepton expands proprietary chipset
Semtech adds two industry veterans to board of directors
Specialty gas expansion
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: