+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
News Article

NIST 3-D chip imaging could propel computing

News

FinFET transistors are among the 3-D microchip structures that could be measured using a new technique known as through-focus scanning optical microscopy (TSOM)

A technique developed several years ago at the National Institute of Standards and Technology (NIST) for improving optical microscopes has now been applied to monitoring the next generation of computer chip circuit components.

It could provide the semiconductor industry with a crucial tool for improving chips for the next decade or more.

The technique, called Through-Focus Scanning Optical Microscopy (TSOM), has now been shown to detect tiny differences in the three-dimensional shapes of circuit components, which until very recently have been essentially two-dimensional objects.

These three-dimensional tri-gate (FinFET) transistors, pictured above, are among the 3-D microchip structures that could be measured using TSOM. (This image was courtesy of Intel Corporation).

TSOM is sensitive to features that are as small as 10 nm across, perhaps smaller, addressing some important industry measurement challenges for the near future for manufacturing process control and helping maintain the viability of optical microscopy in electronics manufacturing.

For decades, computer chips have resembled city maps in which components are essentially flat. But as designers strive to pack more components onto chips, they have reached the same conclusion as city planners: The only direction left to build is upwards.

New generations of chips feature 3-D structures that stack components atop one another, but ensuring these components are all made to the right shapes and sizes requires a whole new dimension, literally, of measurement capability.

"Previously, all we needed to do was show we could accurately measure the width of a line a certain number of nanometres across," explains NIST's Ravikiran Attota. "Now, we will need to measure all sides of a three-dimensional structure that has more nooks and crannies than many modern buildings. And the nature of light makes that difficult."

Part of the trouble is that components now are growing so small that a light beam can't quite get at them. Optical microscopes are normally limited to features larger than about half the wavelength of the light used, about 250 nm for green light.

So microscopists have worked around the issue by lining up a bunch of identical components at regular distances apart and observing how light scatters off the group and fitting the data with optical models to determine the dimensions. But these optical measurements, as currently used in manufacturing, have great difficulty measuring newer 3-D structures.

Other non-optical methods of imaging such as scanning probe microscopy are expensive and slow, so the NIST team decided to test the abilities of TSOM, a technique that Attota played a major role in developing.

The method uses a conventional optical microscope, but rather than taking a single image, it collects 2-D images at different focal positions forming a 3-D data space.

A computer then extracts brightness profiles from these multiple out-of-focus images and uses the differences between them to construct the TSOM image.

The TSOM images it provides are somewhat abstract, but the differences between them are still clear enough to infer minute shape differences in the measured structures - bypassing the use of optical models, which introduce complexities that industry must face.

"Our simulation studies show that TSOM might measure features as small as 10 nm or smaller, which would be enough for the semiconductor industry for another decade," Attota says. "And we can look at anything with TSOM, not just circuits. It could become useful to any field where 3-D shape analysis of tiny objects is needed."

More details of this work have been published in the paper, "Critical dimension metrology by through-focus scanning optical microscopy beyond the 22"‰nm node," by R. Attota et al in Applied Physics Letters. DOI: 10.1063/1.4809512.

Purdue, imec, Indiana announce partnership
Resilinc partners with SEMI on supply chain resilience
NIO and NXP collaborate on 4D imaging radar deployment
Panasonic Industry digitally transforms with Blue Yonder
Global semiconductor sales decrease 8.7%
MIT engineers “grow” atomically thin transistors on top of computer chips
Keysight joins TSMC Open Innovation Platform 3DFabric Alliance
Leti Innovation Days to explore microelectronics’ transformational role
Quantum expansion
indie launches 'breakthrough' 120 GHz radar transceiver
Wafer fab equipment - facing uncertain times?
Renesas expands focus on India
Neuralink selects Takano Wafer Particle Measurement System
Micron reveals committee members
Avoiding unscheduled downtime in with Preventive Vacuum Service
NFC chip market size to surpass US$ 7.6 billion
Fujifilm breaks ground on new €30 million European expansion
Fraunhofer IIS/EAS selects Achronix embedded FPGAs
Siemens announces certifications for TSMC’s latest processes
EU Chips Act triggers further €7.4bn investment
ASE recognised for excellence by Texas Instruments
Atomera signs license agreement with STMicroelectronics
Gartner forecasts worldwide semiconductor revenue to decline 11% in 2023
CHIPS for America outlines vision for the National Semiconductor Technology Center
TSMC showcases new technology developments
Alphawave Semi showcases 3nm connectivity solutions
Greene Tweed to open new facility in Korea
Infineon enables next-generation automotive E/E architectures
Global AFM market to reach $861.5 million
Cepton expands proprietary chipset
Semtech adds two industry veterans to board of directors
Specialty gas expansion
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: