IHS: 3D technology to push NAND Flash forward
With conventional semiconductor manufacturing technology soon to reach its limit in the NAND Flash segment, suppliers of these memory chips are set to adopt 3D production techniques in order to boost the capacity of their devices
IHS believes that by 2017, 65.2 percent of all NAND memory chips shipped worldwide will be produced using 3D manufacturing processes, up from less than 1 percent this year.
The market research firm's "Flash Dynamics brief" also predicts that the share of the overall NAND market accounted for by 3D technology is set to jump to 5.2 percent in 2014, and then surge to 30.2 percent of total Flash memory shipments in 2015.
In 2016, 3D NAND will enlarge its market share to 49.8 percent, representing about half of the entire Flash memory market, as presented in the figure below.
"There's widespread agreement that just one or two generations may be left before NAND Flash made using conventional planar semiconductor technology reaches its theoretical limit," says Dee Robinson, senior analyst, memory and storage for IHS.
"As lithographies shrink further, performance and reliability may become too degraded for NAND to be used in anything but the very lowest-cost consumer products. Because NAND suppliers are compelled to continue building products with higher densities and lower prices, they will migrate to 3D manufacturing quickly in the coming years," Robinson adds.
A major factor driving NAND makers to keep improving their products is demand from products like media tablets and smartphones. These devices are demanding higher capacity and less expensive storage of content, including pictures, music and video.
Another dimension of Flash manufacturing
Historically, NAND Flash makers have employed miniaturisation to increase the capacity and reduce the costs of their products. Miniaturisation is the process of shrinking the NAND Flash cells with each successive technology generation, allowing suppliers to fit more bits on each silicon wafer.
With 3D technology, the emphasis shifts away from miniaturisation and toward increasing density by layering NAND Flash cells on top of each other. This will be the most cost-effective way of pushing NAND to the next level because most of the existing manufacturing equipment can continue to be used, minimising expenses while maximizing return on investment.
Invention dimension
Samsung and SK Hynix, the biggest players in the global memory trade, announced their initiatives in 3D NAND in August during the Flash Memory Summit in Santa Clara, California.
Samsung said commercial production of V-NAND, the company's name for its 3D Flash memory products, started during the second quarter. The end product will be a V-NAND-based solid-state drive, in 480- and 960-gigabyte densities, initially targeting the enterprise market.
The Korean stalwart believes V-NAND will be more reliable than 1x nm NAND, consume less power and also deliver higher performance in sequential as well as random writes.
The cost differential between a V-NAND solid-state drive and one powered by traditional Flash memory will be quite large, IHS expects. This would be one of the reasons why Samsung is aiming the product first at the enterprise market.
Samsung archrival SK Hynix is also planning to manufacture 3D NAND; its initial 3D product will be very similar to Samsung's V-NAND, and will be available in 128-gigabyte capacity. But this is part of a two-pronged approach, as the company is also sampling a 16 nm product.
Market acceleration
While both Samsung and SK Hynix have previously mentioned internal development of 3D NAND, the timeline for production has moved faster than expected, and the accelerated pace is much quicker than many in the industry had anticipated.
Other memory manufacturers, however, have decided to continue with planar NAND for at least one more generation, pushing any 3D plans to a later date. This group includes SanDisk of California, Idaho-based Micron Technology and Toshiba of Japan.
All told, initial production of 3D NAND will be limited, and failure analysis will be difficult because of the multilevel structure of the device. Still, an initial ramp-up of higher-performing products into the enterprise segment will enable suppliers to generate margins and allow processes to mature, IHS believes, even though it may be some time before 3D contributes meaningfully to overall industry bit growth.
At any rate, the 3D race for NAND has already begun, solidifying the timeline for the new technology. NAND suppliers that have yet to address the change are likely to feel pressure to innovate as a result.
