+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
News Article

Physicists demonstrate a simpler method of magnetic vortex excitation

News
New discovery has potential to revolutionise spintronics by using less current "“ thus increasing battery life "“ in future electronic devices

A team of scientists, including physicists from MIPT and the Russian Quantum Centre, have demonstrated a method of exciting magnetic vortices "“ which could potentially be used in the electronics of the future as information carriers "“ using less current. The corresponding theoretical calculations have been published in Physical Review B.

Magnetic vortices are microscopic areas of magnetized material with uniquely arranged magnetization vectors. In the centre of the vortex, the magnetization vector is oriented perpendicularly to the surface, and at the edges these vectors form a structure resembling a vortex or whirlpool.




The magnetization vector is in turn linked to spin, a quantum characteristic of individual particles. Controlling magnetic vortices, through spin or otherwise, is what scientists are researching as a foundation for the electronics of the future "“ spintronics. In order to store and process information in spintronics, the movement of electrons from one position to another or the flow of electronic charges is not important "“ what is most important is spin and the movement of electrons with a certain spin, a spin current. Information can be transmitted by spin rather than electronic charge, and the charged particles do not necessarily need to move anywhere "“ they can remain in the same position, but their spins will rotate, transmitting information "along the chain".

Using spin to transmit a unit of information is very interesting because the processing (e.g. changing 0 to 1 in binary code through one spin revolution) requires much less time and energy than a similar operation in modern electronics. Microchips operating with electron spin will heat up less and a number of calculations also demonstrate that they will be less sensitive to radiation. Spintronics stands a good chance of replacing many common devices, but for this to happen, scientists will first need to address a number of fundamental and practical issues.



Spintronics will require new methods of storing and processing information. Magnetic vortices could potentially be a solution "“ they can be used both to store information (0 "“ spin clockwise, 1 "“ spin anti-clockwise, or 0 "“ core magnetized up, 1 "“ magnetized down) and process information "“ different vortices interact differently with the spin current (a flow of electrons, in which the largest portion is made up of electrons with a certain spin), which will make it possible to build complex devices and even artificial neural networks. These vortices will also be able to be used to create AC nanogenerators, which could potentially be used in telecommunication applications.

 

 

 

Permalloy is a common electrical alloy that was used (and is still used today) to make transformer cores and braided shields for telegraph cables. Despite the fact that it is used in devices that are now considered outdated, the metal could be used as a basis for fundamentally new devices.

Methodology

In their paper, the authors examined the process of an alternating radio frequency current (of approximately 1GHz) passing along the surface between permalloy and bismuth selenide, a ferromagnet and topological insulator respectively, and proposed a theoretical description of the observed phenomena.

This combination of materials was, of course, not chosen at random. Permalloy is highly ferromagnetic and its ability to be magnetized in the absence of an external magnetic field is of key importance. This is why magnetic vortices can be excited within it. These vortices contain small "spinning" "magnets" (or magnetic moments to be precise), which is what this material is made up of. In addition, permalloy has been used in industry for a very long time "“ it was first discovered in the early 20th century and has since been used extensively, in the manufacture of transformer plates for example.

Bismuth selenide is a topological insulator: it will only allow an electric current to flow along its surface. This effect should not be confused with the skin effect, where high-frequency current has a marginal level of distribution within a conductor: a topological insulator prevents the movement of charge in bulk, this includes low-frequency charges and even direct current (DC). In addition, its properties are the result of purely quantum effects. The unique characteristics of topological insulators also prevent electrons from changing their spin during motion, which makes them a perfect conductor for spin current.

It should be emphasized that the authors conducted the numerical simulation using the SpinPM package they developed previously. This program has already been used by the authors and its predictions were confirmed during experiments, which were later described in the scientific journals Physical Review Letters and Nature Physics.

The study found that in order to excite magnetic vortices with a topological insulator, alternating current (AC) must be used, as direct current (DC) has almost no effect on them. When AC was applied, a sharp resonance excitation of the vortices was observed "“ on approaching a certain current frequency the vortex radius increases rapidly, forming a sharp peak, the top of which shifts slightly at different current densities. We also note that the current densities required to excite the vortices were several times lower than previously observed.

"We have demonstrated that the torques with certain symmetry that arise at the Py/Bi2Se3 interface while alternating current passes along it can be used to effective excitation of a magnetic vortex. The magnitude of the effect was taken from an experimental paper written by our colleagues, and for this value the required current densities were indeed significantly lower than previously observed. It is worth noting that these torques can be observed not only for Bi2Se3, but also for a wide range of materials including topological insulators and materials with a giant Rashba effect," explains Petr Skirdkov, the main author of the article.

Previous experimental studies have shown that current passing along the surface between different layers of a heterostructure such as this is able to generate a torque. The authors of the paper have demonstrated that it is possible to effectively excite magnetic vortices using this torque.

 

Research in the field of spintronics is essential for the development of modern technologies. It is now an indisputable fact that semiconductor electronics will no longer develop according to Moore's Law (the first signs of this are already evident). And it is possible that in the future all technologies will switch from using electrical charges to particle spins, which require minimal amounts of energy and will increase speed thousands of times. Some studies in the field of magnetic heterostructures have even been awarded the Nobel Prize, which only emphasizes their importance.

The study was conducted with the support of RFBR (Russian Foundation for Basic Research) Grants Nos. 12-02-01187 and 14-02-31781, and Project 5-100 of the Moscow Institute of Physics and Technology.

Purdue, imec, Indiana announce partnership
Resilinc partners with SEMI on supply chain resilience
NIO and NXP collaborate on 4D imaging radar deployment
Panasonic Industry digitally transforms with Blue Yonder
Global semiconductor sales decrease 8.7%
MIT engineers “grow” atomically thin transistors on top of computer chips
Keysight joins TSMC Open Innovation Platform 3DFabric Alliance
Leti Innovation Days to explore microelectronics’ transformational role
Quantum expansion
indie launches 'breakthrough' 120 GHz radar transceiver
Wafer fab equipment - facing uncertain times?
Renesas expands focus on India
Neuralink selects Takano Wafer Particle Measurement System
Micron reveals committee members
Avoiding unscheduled downtime in with Preventive Vacuum Service
NFC chip market size to surpass US$ 7.6 billion
Fujifilm breaks ground on new €30 million European expansion
Fraunhofer IIS/EAS selects Achronix embedded FPGAs
Siemens announces certifications for TSMC’s latest processes
EU Chips Act triggers further €7.4bn investment
ASE recognised for excellence by Texas Instruments
Atomera signs license agreement with STMicroelectronics
Gartner forecasts worldwide semiconductor revenue to decline 11% in 2023
CHIPS for America outlines vision for the National Semiconductor Technology Center
TSMC showcases new technology developments
Alphawave Semi showcases 3nm connectivity solutions
Greene Tweed to open new facility in Korea
Infineon enables next-generation automotive E/E architectures
Global AFM market to reach $861.5 million
Cepton expands proprietary chipset
Semtech adds two industry veterans to board of directors
Specialty gas expansion
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: