+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
News Article

Flexoelectricity is more than Moore


Researchers from the ICN2 Oxide Nanoelectronics Group, at the Universitat Autònoma de Barcelona, led an international work, published by Nature Nanotechnology, which has produced the world's first integrated flexoelectric microelectromechanical system (MEMS) on silicon.

The information revolution is synonymous with the traditional quest to pack more chips and increase computing power. This quest is embodied by the famous "Moore's law", which predicts that the number of transistors per chip doubles every couple of years and has held true for a remarkably long time. However, as Moore´s law approaches its limit, a parallel quest is becoming increasingly important. This latter quest is nick-named "more than Moore", and it aims to add new functionalities (not just transistors) within each chip by integrating smart materials on top of the ubiquitous and still indispensable silicon base.

Among these so-called smart materials piezoelectrics stand out for their ability to convert a mechanical deformation into a voltage (which can be used to harvest energy to feed the battery) or, conversely, generate a deformation when a voltage is applied to them (which can be used, for example, in piezoelectric fans for cooling down the circuit). However, the integration of piezoelectricity with silicon technology is extremely challenging. The range of piezoelectric materials to choose from is limited, and the best piezo electrics are all lead based ferroelectric materials, and their toxicity poses serious concerns. Moreover, their piezoelectric properties are strongly temperature-dependent, making them difficult to implement in the hot environment of a typical computer processor, whose junction temperature can reach up to 150 Celsius.

There exists, however, another form of electromechanical coupling that allows a material to polarize in response to a mechanical bending moment, and, conversely, to bend in response to an electric field. This property is called "flexoelectricity", and though it has been known for nearly half a century, it has been largely ignored because it is a relatively weak effect of little practical significance at the macroscale. However, at the nanoscale flexoelectricity can be as big as or bigger than piezoelectricity; this is easy to understand if we consider that bending something thick is very difficult, but bending something thin is very easy. In addition, flexoelectricity offers many desirable properties: it is a universal property of all dielectrics, meaning that one needs not use toxic lead-based materials, and flexoelectricity is more linear and temperature-independent than the piezoelectricity of a ferroelectric.

Researchers from the Catalan Institute of Nanoscience and Nanotechnology (ICN2), a research center awarded as Severo Ochoa Excellence Center and placed in the Campus of the Universitat Autònoma de Barcelona (UAB), in collaboration with the University of Cornell (USA) and the University of Twente (Netherlands), have now managed to produce the world's first integrated flexoelectric microelectromechanical system (MEMS) on silicon. They have found that, at the nanoscale, the desirable attributes of flexoelectricity are maintained, while the figure of merit (bending curvature divided by electric field applied) of their first prototype is already comparable to that of the state of the art piezoelectric bimorph cantilevers. Additionally, the universality of flexoelectricity implies that all high-k dielectric materials used currently in transistor technology should also be flexoelectric, thus providing an elegant route to integrating "intelligent" electromechanical functionalities within already existing transistor technology. The results are published today by Nature Nanotechnology.

The project, led by Dr Umesh Bhaskar and ICREA Professor Gustau Catalan, from the ICN2 Oxide Nanoelectronics Group, was funded by an European Research Council (ERC) Consolidator Grant and a Spanish Project from Plan Nacional de Excelencia Investigadora, as well as by national grants for the US and Dutch teams.

 


Purdue, imec, Indiana announce partnership
Resilinc partners with SEMI on supply chain resilience
NIO and NXP collaborate on 4D imaging radar deployment
Panasonic Industry digitally transforms with Blue Yonder
Global semiconductor sales decrease 8.7%
MIT engineers “grow” atomically thin transistors on top of computer chips
Keysight joins TSMC Open Innovation Platform 3DFabric Alliance
Leti Innovation Days to explore microelectronics’ transformational role
Quantum expansion
indie launches 'breakthrough' 120 GHz radar transceiver
Wafer fab equipment - facing uncertain times?
Renesas expands focus on India
Neuralink selects Takano Wafer Particle Measurement System
Micron reveals committee members
Avoiding unscheduled downtime in with Preventive Vacuum Service
NFC chip market size to surpass US$ 7.6 billion
Fujifilm breaks ground on new €30 million European expansion
Fraunhofer IIS/EAS selects Achronix embedded FPGAs
Siemens announces certifications for TSMC’s latest processes
EU Chips Act triggers further €7.4bn investment
ASE recognised for excellence by Texas Instruments
Atomera signs license agreement with STMicroelectronics
Gartner forecasts worldwide semiconductor revenue to decline 11% in 2023
CHIPS for America outlines vision for the National Semiconductor Technology Center
TSMC showcases new technology developments
Alphawave Semi showcases 3nm connectivity solutions
Greene Tweed to open new facility in Korea
Infineon enables next-generation automotive E/E architectures
Global AFM market to reach $861.5 million
Cepton expands proprietary chipset
Semtech adds two industry veterans to board of directors
Specialty gas expansion
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Silicon Semiconductor Magazine, the Silicon Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: